Extra-strength aroma that lasts. Batch-to-batch consistency you can trust. Terpene Spray flavor lines built to match today’s most popular packaging.
Louder aroma that lasts
Consistent from
batch to batch
Built to match todays most popular packaging
Choose your method: drops for flavor you taste, spray for aroma people smell, or custom blends built to match your brand.
Use drops when you want stronger flavor during use and aroma that other people can smell in the air.
Use BagPOP™ Spray when you want packaging-matched aroma, stronger first-open smell, or a bigger flavor line.
Match packaging, build a product line, or make a signature flavor customers remember and ask for again.
Whether you want a soft flavor boost or a full-on flavor takeover, BagPOP™ gives you the control to get there. Use a little for a mild change, or push it harder for crazy loud flavor that people notice immediately.
Spread flower in an even layer.
Go light for subtle flavor or heavier for louder aroma.
Wait 10–15 minutes. Let it settle, then enjoy.
Add drops directly to flower when you want the flavor to come through. You taste it when you use it, and the smell carries through the air.
Add drops to each piece to change the flavor.
Approximately 2–5 drops per quarter-sized piece.
Seal the product. Wait 10 minutes, then enjoy.
From consumer-level buyers to product manufacturers, BagPOP™ gives your store the flavor products people are already asking for. Offer small bottles, bulk options, and packaging-matched flavor options that make your shop the flavor destination in your city.
Unlock packaging, flavoring, and hardware options.
Reach customers, producers, and business buyers.
We offer customized flavors for your local market.
Whether you already have packaging and need the right flavor to match it, want a popular flavor you can’t find anywhere, or need a proven flavor direction replicated for your own line, Mr. Extractor® builds custom terpene spray flavor systems around your brand, your market, and your production goals.
Already have packaging? We create flavor profiles that match the concept, name, and customer expectation behind your product.
If customers are already asking for a flavor and nobody seems to have it, we can create it for your line.
Need to recreate a flavor direction that already works? We develop close-match flavor replications tailored to your brand.
Here are the quick facts and most common questions about BagPOP™ Terpene Spray. Whether you need flavor-matching advice, usage instructions, or answers to specific questions, you’ll find what you need below.
BagPOP™ Spray is typically used at 1 to 3 sprays per ounce, with 2 sprays per ounce as the standard starting point for strong, clean aroma coverage.
When applying directly by drops, use 2 to 5 drops per quarter-sized piece for a more noticeable flavor shift and inhale/exhale effect.
Need more than the basics? The instruction section below breaks down ratios by ounce, pound, bottle size, spray method, drop method, and bulk production use.
Goal Create a bold, brand-matched aroma that hits as soon as the bag, jar, or packaging is opened.
How to apply (batch spray)
Make the material taste like the flavor name during use, not just smell good in the bag or pouch.
How to apply (drop method)
Pro Tips (drop method)
This product is simple to use, but there are a few important things to know so you don’t misunderstand how it works or waste material while dialing it in.
Don’t judge the scent in the bottle or right after applying When you sniff the bottle, you’re smelling a highly concentrated formula. It can come across sharp or “chemical” in that state. That’s normal. The final aroma and flavor profile only fully develops after it has been applied to material and given time to settle.
Expect the aroma to change as it settles (12–24 hours) Right after application, the aroma on your material will be strong and top-heavy. Once sealed in a bag or container, the vapors circulate through the entire package and redistribute evenly. Over the next 12–24 hours the profile will lighten, balance out, and match the finished scent your customers will experience.
Always let treated material dry and rest before use The liquid is mildly flammable in its wet state. After spraying or adding drops, give the treated material time to dry and rest. Sealing the batch and allowing it to sit is part of the normal process and helps the profile move through the container evenly.
Not for food or direct consumption This product is designed only for aroma and flavoring of flower and plant material. It is not intended to be eaten, added to food or drinks, or used as a direct flavoring on the body.
Don’t use the concentrate on its own The concentrate in the bottle is not meant to be used undiluted. It should always be applied to material first, allowed to settle and dry, and then used as part of a normal session so you experience the intended aroma and flavor.
Using it alongside other terpene products This formula is chemically different from standard terpene concentrates and may separate if mixed in the same bottle. If you choose to combine it with other terpenes, shake very well before each use and always test on a small batch first. When in doubt, layer flavors on the material instead of mixing them in the bottle.
Flavor mixing within this line You can mix different BagPOP™ flavors with each other. For example, a strawberry profile can be layered with a banana profile to create a custom blend. Always test combinations on a small batch before scaling up.
Test small before scaling up Before treating large batches, always:
Once you like the result, lock in those numbers as your house recipe for consistent, repeatable batches.
If you want the exact numbers, the full instruction section below goes deeper into spray ratios, drop method math, bottle-size recommendations, ounce-to-pound coverage, and commercial batch guidance so you can choose the right method for your product.
BagPOP™ Terpene Spray is an extra-strength terpene and flavor system created by the original inventor of terpene profiles specifically as a spray for plant material. Instead of going into devices or base liquids, it is specifically designed to be misted or dropped directly onto bulk flower, pre-rolls, and concentrates.
No one else has this formulation. The goal is simple: make the aroma and taste match the flavor name on the bag, with recipes you can repeat every batch.
BagPOP™ works in two main ways: the Spray Method and the Drop Method. Use the Spray Method to lightly mist trays, tubs, or bins of plant material from 8–12 inches away, then seal everything in bags or jars so the aroma can circulate and build BagPOP™ on first open.
Use the Drop Method when you want clear flavor on individual buds, pre-rolls, or jars. Treat a small test group, let them rest in sealed packaging, and then scale the recipe that you like.
Always test on a small batch first, write down your favorite ratios, and then repeat them for future runs.
After spraying or dropping, treated material should rest in sealed bags or jars, not open air. Many operators check test batches after about 12–24 hours to see the true finished aroma and flavor. Rest time lets the spray soak in, lets excess carrier flash off, and helps the batch smell and taste more even from bag to bag.
No. BagPOP™ Terpene Sprays are used to adjust aroma and flavor only. They do not contain THC or nicotine and are not designed to change potency. Think of BagPOP™ as a professional-grade flavor and aroma system for plant material, not a potency booster.
No. BagPOP™ Terpene Sprays are not for ingestion or food use. They are formulated specifically to be sprayed or dropped onto plant material and related products to adjust aroma and flavor. Do not use BagPOP™ in beverages, edibles, or any food applications.
Yes. Many people blend compatible BagPOP™ flavors—for example, pairing a candy-style profile with a fruit profile—to create custom signatures. BagPOP™ is designed as a spray and drop system for plant material, so multiple flavors can be layered as long as you test on small batches first.
Any time you experiment or combine BagPOP™ with other terpenes, record your exact sprays-per-ounce or drops-per-piece so you can repeat the results you like.
Most terpene products were developed to be mixed into devices or base liquids. BagPOP™ was created by the original inventor of terpene profiles specifically as a spray and drop system for plant material.
The strength, carrier, and recipes are tuned for bulk flower, pre-rolls, and concentrates, so you get stronger, longer-lasting BagPOP™, flavors that match your packaging, and batches you can repeat instead of chasing a lucky run.
TELL US WHAT FLAVOR YOU NEED →
General usage notes:
• Terpene Spray is designed for aroma and flavoring of flower, plant material, and pre-rolls.
• Results can vary slightly by cultivar, moisture content, and storage conditions—always test a small amount first before treating a full batch.
• Store bottles upright, tightly closed, in a cool, dark place when not in use.
Save instantly on terpene profiles, sprays, and modifiers.
Use Code: Biscotti
at checkout
USE CODE: CAPJUNKY
at Checkout!
USE CODE: COTTONCANDY
at CHECKOUT
